Ahl-Alkawther Company

EDUCATIONAL

TRAINERS

FROM KANDH

Features:

  • MTS-86C helps students to understand the architecture and programming of 8086 computer. The system contains five main parts: (1) an 8086 CPU (2) system and user memory (3) world standard chip sets (4) input and output devices, and (5) external interface.
  • Students edit and make a assembly program codes from PC and observe instant results after they download and execute programs from system memory. Debug functions are also available via PC or system keypad interface.

FROM KANDH

Features:

  • KL-920 is implemented with high speed MCU, DSP and high flexible FPGA devices, giving students more opportunities to setup and observe digital data signals at each transmission stage.
  • Learning topics include ASK / FSK transmission in wireless ISM band, FEC codec technique (block code and convolution code), digital data formatting (Preamble, ID, FEC and CRC), Manchester coding, SONET transportation frame (STS1 and STM1), TDMA, PCM, TDM, DSSS, CDMA, Digital filter, etc..

Advanced-Communication-System

FROM KANDH

Features:

  • 144MHz VHF FM Transceiver Trainer
  • KL-900B Analog Communication System discloses the secret of the walky-talky based on the 144MHz VHF band. The circuitry of walky-talky is shown as blocks: receiver block, transmitter block, audio amplifier block and microphone amplifier block.
  • Block diagrams are printed clearly on the panel of the module, giving students a comprehensive view of how walky-talky works.

Analog-Communication-System

FROM KANDH

Features:

  • 144MHz VHF FM Transceiver Trainer
  • KL-900B Analog Communication System discloses the secret of the walky-talky based on the 144MHz VHF band. The circuitry of walky-talky is shown as blocks: receiver block, transmitter block, audio amplifier block and microphone amplifier block.
  • Block diagrams are printed clearly on the panel of the module, giving students a comprehensive view of how walky-talky works.

FROM KANDH

Features:

  • The trainer provides hands-on training for the students to get a good understanding of the operating principles of probes, sensors, pressure and electronic display system.
  • The Cockpit Instrumentation Trainer which includes the fault simulation, for allowing the instructor to insert a selected fault or simulate faults, helps students to identify the fault and troubleshoot the problem.

FROM KANDH

Features:

  • The A320 Flight Simulator, which is valuable in teaching pilots for conducting simulation, is realistic replica of Airbus 320 cockpit. The system aims to provide students with concepts in various avionics & aircraft instrumentation.
  • External Instructor station will allow the instructor to monitor, control and simulate faults to the operating flight simulator, display the exact flying operation.

FROM KANDH

Features:

  • KL-900A offers experiments for fundamental technical concepts on telecommunication.
  • It enables students to acquire a clear experimental view and, further, they will be familiar with the operational aspects of the work in the telecommunication laboratory.

FROM KANDH

Features:

  • The electrical machines system leads students to distinguish the mechanical similarity and difference among all electrical machinery. Students study and turn all kind of electrical machinery into circuit models for the foundation. Moreover, it enhances students ability for further application and control. Besides facilitating teaching, it makes students be familiar with a different kind of electrical mechanical test.

FROM KANDH

Features:

  • The A320 Flight Simulator, which is valuable in teaching pilots for conducting simulation, is realistic replica of Airbus 320 cockpit. The system aims to provide students with concepts in various avionics & aircraft instrumentation.
  • External Instructor station will allow the instructor to monitor, control and simulate faults to the operating flight simulator, display the exact flying operation.
  • IOT-110 is a platform that integrates the training of edge computing, Al., and loT. Its system consists of sensor modules, edge computing modules, and Al computing accelerators. The course provided is structured coherently and clearly, and the concepts of sensors, networks, and applications can be introduced progressively and thoroughly. With this system, users shall be able to deploy various smart applications of IOT and edge computing.
  • Each of the 16 sensor modules is embedded in a separate aluminum housing with a built-in hook and powered by a rechargeable lithium battery, so the sensor modules can be deployed in many different locations as well as on the training stand. The name of each sensor is printed on the housing.

FROM KANDH

Features:

  • The GES-100 Solar Cell Trainer is an easy and self-contained trainer designed for learning the basic configuration and characteristics of a solar cell.
  • Through the use of different irradiations for various load units, students study the photoelectric effect of solar cells and plot the current-voltage curve as well as charging / discharging curves.

FROM KANDH

Features:

  • There are seven layers of OSI model and from the second to the fourth of which plays the key role in operating system kernels such as Linux and Windows which are difficult for users to understand. Internet TCP/IP Protocol Training System not only reveals the inner workings of TCP/IP protocol software, but also provides methods to modify the behavior of TCP/IP protocol software for experiment purpose.

FROM KANDH

Features:

  • Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing /
  • Wiring language. Besides easy-to-use hardware and software interface, Arduino is designed to be as flexible as possible to fit your project’s needs.
  • MTS-101 Tutor for Arduino provides an environment for Arduino to interact with different forms of electronics (26 module blocks) with simple codes and connections. With universal breadboard, it’s convenient for students to construct the circuits that are not provided by the MTS-101.

FROM KANDH

Features:

  • GES-500 (Wind and Solar Hybrid System) is composed of Solar Panel, Battery Bank Module, MPPT Solar Charging Controller Module, DC-AC Inverter Module, Grid-tie Inverter Module, Wind Generator Set, Wind Energy Monitor Module, Three-phase Rectifier Module, Wind and Solar Hybrid Controller Module, Load Module and Meters. By means of combining all these control systems, a teaching platform for implementation of the wind power, solar power and hybrid experiments is presented. It can help students understand the theory of on-grid and off-grid solar power, wind power generation system, hybrid system and further create practical applications.

FROM KANDH

Features:

  • The GES-200 Wind Energy Trainer is an easy and self-contained trainer designed for learning the basics and characteristics of wind energy.
  • The current-voltage characteristic curves and charging / discharging curves are obtained through the use of different wind speeds, load units and wind generators.

FROM KITEK

Features:

  • 8051/89c52 CPU operating @ 11.0592 MHz.
  • 32K user RAM with Battery Backup, 16K bytes monitor EPROM
  • Peripherals like 2x 8255, 8253,8251, RS-232 interface
  • Onboard Single Line Assembler / Disassembler
  • 20×2 Alphanumeric LCD Display with Backlite with 101 ASCII Keyboard
  • In-Built Power Supply of +5V/1.5A, ±12V/250mA

FROM KITEK

Features:

  • Based on 8085 CPU operating at 6.144 MHz.
  • 88KB of RAM with Battery Backup, 8K Monitor EPROM
  • Peripheral like 8255,8253, RS-232 using SID/SOD lines
  • 28 keys keyboard with six 7- segment display using 8279
  • In-Built Power Supply of +5V/1.5A, ±12V/250mA

FROM KITEK

Features:

  • Based on 8086/8088 CPU operating at 2.5/5MHz
  • 16KB of RAM with Battery Backup, 16K Monitor EPROM
  • Peripheral like 3x 8255, 8253, 8259, 8251 RS-232 interface
  • On-board ADC0809,DAC0800,LM35 sensor.
  • 20×2 Alphanumeric LCD Display with Backlite with 101 ASCII Keyboard
  • In-Built Power Supply of +5V/1.5A, ±12V/250mA

UCT-02 UNIVERSAL COMMUNICATION BOARD

FROM KITEK

UIT-02 SENSOR TRAINER BOARD

FROM KITEK

UIT-02 SENSOR TRAINER BOARD

FROM KITEK

ADVANCE FIBER OPTIC TRAINER

FROM KITEK

ADVANCE FIBER OPTIC TRAINER

FROM KITEK

FROM KITEK

Features:

  • Trainer having control panel should provided in 40X40mm Aluminum profile rack with sturdy table top flat panel
  • .
  • Should have 3phase DOL starter 4pole MCB, contractor & relay panel
  • Should have 3 phase multifunction meter panel, 3 Phase Contractor Panel (3nos), 3 Phase Over Load relay Panel. Switch Panel, Industrial Socket Panel, Alarm Annunciate Panel, Timer & AC/DC supply Panel Lamp Load panel (2nos).
  • Should supply with 3 Phase AC Motor.

FROM KITEK

Features:

  • 16 Logic Level Inputs & 16 LED for output indication.
  • Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
  • Dual Logic Pulsar, Logic Probe, SPDT Relay, Buzzer, Bar LED display, DPM for Voltage & Current, Potentiometers of 1K, 1M,
  • Two digit 7 segment display with HEX to 7 segment decoder.
  • Bread Board of 1260 tie points
  • Sine, Square and Triangular output waveform from 0-200Khz.
  • Fixed DC +5V, ±12V power supply.
  • All interconnections are made using 2mm banana Patch cord.

FROM KITEK

Features:

  • Trainer having control panel should provided in 40X40mm Aluminum profile rack with sturdy table top flat panel.
  • Should have 3phase DOL starter 4pole MCB, contractor & relay panel
  • Should have 3 phase multifunction meter panel (2nos), FWD/REV Switch panel.
  • Should have Transmission Line Compensation panel.
  • Should have 3 Phase Resistive Load panel,Inductive Load panel, Capacitive Load panel.
  • Should have table top Simulated Transmission Line, table top Dimmer.

ELECTRICAL & ELECTRONICS SYSTEM TRAINER

FROM KITEK

BASIC ELECTRONICS TRAINER KIT KMS-01

FROM KITEK

FROM KITEK

Features:

  • Machine trainer having control panel should provided in 40X40mm Aluminum profile rack with sturdy table top flat panel.
  • Should have 3phase DOL starter 4pole MCB, contractor & relay panel
  • Should have 3 phase multifunction meter panel (2nos), FWD/REV, STAR/DELTA Switch panel, Rotor & Sync panel, 1 ph. Motor, Voltmeter & Ammeter Panel, SCR controlled variable DC panel.(3nos), Instrumentation panel, Synchronization panel, Variable AC/DC panel, 1 Phase AC/DC Resistive Load panel, 3 Phase Resistive Load panel, 3 Phase Inductive Load panel, Capacitive Load panel.
  • Should supply with motor 3 Phase AC Slip ring star/delta Induction Motor,Capacitor Start 1 Phase Induction Motor, Split phase 1 Phase Induction Motor, 3 Phase Synchronous Motor, Universal Motor, 3 phase salient pole Alternator, DC Machine Motor/Generator Trunion, 3 phase 2 speed Induction Motor. DC Machine Motor.

UNIVERSAL COMMUNICATION BOARD UCT-02

FROM KITEK

TRANSDUCER TRAINER KIT UIT-03

FROM KITEK